The High Lifter APEXX High Clearance 2" Forward Offset Control Arms for Can-Am Defender HD10 models are stronger, adjustable and engineered for the most punishing terrain with 1.75" of additional ground clearance and raked forward 2".  Push your Defender to the limits and tackle obstacles you couldn't before! Optional preinstalled ball joints to simplify install. 

Store Wide Sale! Save 5% to 15% at Checkout on 1000's of products. 

HDFFA-C1D-B Fits
2020-22 Defender HD10 DPS
2020-23 Defender HD10 XT
2020-22 Defender MAX HD10 DPS
2020-23 Defender MAX HD10 XT
2020-23 Defender PRO HD10 DPS
2020-23 Defender PRO HD10 XT
2021-23 Defender HD10 6x6 XT
2023 Defender HD10 6x6 DPS

Click Here for C1D Instructions

HDFFA-C1DXMR-B Fits
2020 Defender HD10 CAB XT
2020-21 Defender HD10 LTD CAB
2020 Defender MAX HD10 CAB XT
2020-23 Defender MAX HD10 Lone Star
2021 Defender MAX HD10 LTD CAB
2022 Defender HD10 Limited
2022 Defender MAX HD10 Limited
2022-23 Defender PRO HD10 Limited
2022 Defender PRO HD10 Lone Star
2023 Defender HD10 CAB DPS Limited
2023 Defender HD10 CAB XT Limited 6x6
2023 Defender MAX HD10 CAB XT Limited
2023 Defender MAX HD10 Lone Star CAB

Click Here for C1DXMR Instructions

Features
Adjustable heat-treated collars for camber adjustability with a 1” thread
Raked forward 2"
Over 3 degrees of camber adjustment in each direction
Heavy duty ball joint brackets to eliminate deformation issues, Keller ball joint compatible
Ladder bar compatible with the 1.5” ID clamps
Extreme duty 1.5” x .120” DOM steel construction
Up to 2” of added ground clearance compared to OEM lower arm
Mounting accommodations for OEM brake lines using OEM tabs instead of P-clamps
Optimized sway bar linkage angles
Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
Powder Coated

Tire Fitment: Up to 34.5" - This tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Heavy Duty Strength
High Lifter arms are constructed out of 1.5” DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.

Reinforced Ball Joints Brackets
Portals and large tires apply torque that can distort the ball joint bracket, leading to failure of the arms. With over 130% increase in the ball joint mounting area, we are helping to prevent breakdown or “egging” of the mounting bracket.