Atlas Pro Can-Am Defender BFT Suspension Kit (2016-23)

The SuperATV Atlas Pro BFT Suspension Kit for Can-Am Defender models so you can Rock 34” Tires. Do you want to add more tire clearance without raising your center of gravity with a big lift? No problem, the SuperATV Can-Am Defender Atlas Pro BFT Suspension Kit is just what you need. With this suspension kit, you can install massive 34” tires and keep your center of gravity low without adding a heavy lift kit. 

Store Wide Sale! Save 5% to 15% at Checkout on 1000's of products. 

Fits Models Listed Below
Defender HD 5 : 2017+
Defender HD 5 DPS : 2017-2019
Defender HD 8 : 2016+
Defender HD 8 DPS : 2016+
Defender HD 8 XT : 2016+
Defender HD 8 XTP : 2018+
Defender HD 10 : 2016-2019
Defender HD 10 DPS : 2016-2019
Defender HD 10 XT : 2016-2019
Defender HD 10 XT Cab : 2016-2017
Defender HD 10 XTP : 2018-2019
Defender HD 10 Mossy Oak : 2018-2019
Defender MAX HD 8 : 2017+
Defender MAX HD 8 DPS : 2017+
Defender MAX HD 8 XT : 2017+
Defender MAX HD 10 : 2017-2019
Defender MAX HD 10 DPS : 2017-2019
Defender MAX HD 10 XT : 2017-2019
Defender MAX HD 10 XT Cab : 2017 Only

Click Here for Instructions

NOTE: You must re-use your stock ball joints if you don’t select Preinstalled Ball Joints.

FEATURES
Fit 34” tires with minimal lift
2” forward offset A-arms
Made with 1.5” x .138” wall steel DOM tubing
0.5” larger than stock
0.25” larger than our standard High-Clearance 2” Offset A-Arms
2” of lift
High-clearance—1.5” of additional clearance
Full camber adjustability
Pivot blocks pre-adjusted to factory length
Reinforced shock mounts
Includes all 4 front A-arms
Can be used with OEM or aftermarket ball joints
UV-Resistant powder coat finish
Backed by a lifetime warranty!

KIT INCLUDES:
Atlas Pro Upper and Lower Front A-Arms
Steering stop kit
17” Limit straps (Not needed if running Rhino 2.0 Axles)
Spring spacers
Shock brackets
Shock bump stop (Required only for 34” tires)

NOTE: You must re-use your stock ball joints if you don’t select preassembly.

How’d we do it? BFT gives you monstrous 2” forward offset Atlas Pro A-arms and a 2” lift in the form of shock brackets and spring spacers.

Unbeatable Atlas Pro Tubing
These Atlas Pro A-arms are strongest we’ve ever made. They’re made with 1.5” diameter wall steel DOM tubing that’s 0.5” larger than stock and 0.25” larger than our standard high-clearance A-arms. Tougher than the competition, they fortified their design to address weak spots found on OEM. The tubing is treated with a UV-resistant powder coating that makes them super resistant to rust and corrosion.

When it comes to strength, no detail was spared. The brackets are made with CNC laser-cut steel and the spring spacers are made from billet aluminum. They give you 1.5” of added ground clearance, too. Muscular looks, higher clearance, and improved performance on rough terrain? This suspension kit dominates.

Backed by a Lifetime Warranty
SuperATV’s BFT Suspension Kit is strong enough to come backed by a lifetime warranty. The 1.5” diameter wall steel DOM tubing makes our A-arms the most durable and resilient on the market. Ride your UTV the way you want through monster mud holes and over ridiculous obstacles and never miss a beat.