With the Snorkel Your ATV Polaris RZR XP Turbo 3 Inch Warrior Riser Snorkel Kit for 2021-22 Models you will stop staring at the hole that is too deep for you to” send it!” A snorkel kit will move your vent tube to a higher level so you can push through higher water levels.
There are no returns or refunds on any brand of snorkel - All Sales Final.
Note: You have to cut/trim some plastic to install this kit.
2016-21 Polaris RZR TURBO XP EPS
2016-21 Polaris RZR TURBO 4 XP EPS
2019 Polaris RZR TURBO XP LE
2019 Polaris RZR TURBO XP 4 LE
2019 Polaris RZR TURBO XP 4 S
Due to the vent tube being moved, the snorkel can provide clean, dry air through the engine and other parts needing venting on ATVs/UTVs such as clutches, differentials, transmission, carburetors, and fuel tanks. Get your machine snorkeled with Snorkel Your ATV Snorkels so you can tackle the deep waters!
Warrior Riser Snorkel Kits Come Standard with Removable Warrior Wear Tips That Snap-in Easily and Unsnap Easily for Cleaning. Although They Are Not Required to Use with The Warrior Riser, You Will Have Them If and When You Need Them. They Are Easily Cleaned Reusable and Durable for Long Time Use. The Water Repellent Material Is from Outerwears. Your Warrior Wear Will Come Unglued So You Have the Option of Custom Painting or Hydro Graphics Dipping Your Parts to Match Your Machine. Easily Glued with Loctite Stick'N Seal Glue. You May Choose to Glue Them Together with The Water Repellent Pre-Filter Material, Or to Glue them Together Without. Your Choice. The CVT Outlet Should Not Have the Water Repellent Material in Place. The Instructions with Your Kit Contains All Information on Your Warrior Wear Tips.
This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre filter Tips
Warrior Wear pre filter tips come unglued for easy painting and gives you the choice of using the water repellent material or not
Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
Warrior Risers have side mounted built in slide connections for securing and locking your Warrior Risers together cleanly
Rubber boot connections for easy disassembly
All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
This is a 3" Snorkel kit - All Hard Pipe Kit
This kit contains three 3" risers.
Comes with Vent lines and connectors
This is a full and complete snorkel kit
No Tuning or jetting needed with our kits
Please Note: You have to cut/trim some plastic to install most Snorkel kits.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.