With the Snorkel Your ATV Can-Am Commander 1000 Warrior Riser Snorkel Kit for 2011-17 Models you will stop staring at the hole that is too deep for you to” send it!” A snorkel kit will move your vent tube to a higher level so you can push through higher water levels. Due to the vent tube being moved, the snorkel can provide clean, dry air through the engine and other parts needing venting on ATVs/UTVs such as clutches, differentials, transmission, carburetors, and fuel tanks.
There are no returns or refunds on any brand of snorkel - All Sales Final.
Note: You have to cut/trim some plastic to install this kit.
2012-14 Can-Am Commander 1000
2011-13 Can-Am Commander 1000 X
2011-17 Can-Am Commander 1000 XT
2013-16 Can-Am Commander 1000 DPS
2013-17 Can-Am Commander 1000 XT-P
2014-16 Can-Am Commander 1000 LTD
Get your machine snorkeled with Snorkel Your ATV Snorkels so you can tackle the deep waters!
Warrior Riser Snorkel Kits Come Standard with Removable Warrior Wear Tips That Snap-in Easily and Unsnap Easily for Cleaning. Although They Are Not Required to Use with The Warrior Riser, You Will Have Them If and When You Need Them. They Are Easily Cleaned Reusable and Durable for Long Time Use. The Water Repellent Material Is from Outerwears. Your Warrior Wear Will Come Unglued So You Have the Option of Custom Painting or Hydro Graphics Dipping Your Parts to Match Your Machine. Easily Glued with Loctite Stick'N Seal Glue. You May Choose to Glue Them Together with The Water Repellent Pre-Filter Material, Or to Glue them Together Without. Your Choice. The CVT Outlet Should Not Have the Water Repellent Material in Place. The Instructions with Your Kit Contains All Information on Your Warrior Wear Tips.
This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre filter Tips
Warrior Wear Pre Filter Tips come unglued for easy painting and gives you the choice of using the water repellent material or not
Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
Warrior Risers have side mounted built in slide connections for securing and locking your Warrior Risers together cleanly
All Warrior Riser kits ship Black only - Color 3M Decals with UV protection included, Select your color.
Rubber boot connections for easy disassembly
All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
This is a Dual air intake that forms down to one intake at the air box connection - 2" hard pipe kit - 100% glued and assembled for an easy install
This kit contains four 2" Warrior Risers
Comes with Vent lines and connectors
This is a full and complete snorkel kit
No Tuning or jetting needed with our kits
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.