KFI Polaris Ranger XP 1000 & Crew Pro S 72" Snowplow Kit

Clear your driveway and trails with the KFI Products Pro S 72-inch snowplow kit for Polaris Ranger XP 1000 and Ranger Crew XP 1000 models. This kit pairs a metallic-silver steel blade with front plow mount #106165 and the Pro 2.0 push tube for winter snow removal. See the model-specific fitment below before ordering.

What’s included

• 72-inch Pro S plow blade #105072
• Polaris Ranger XP 1000 front plow mount #106165
• UTV Pro 2.0 push tube #106300
• Installation instructions and mounting hardware

Winch required: A winch is needed to lift and lower the blade and is not included. Shop ATV and UTV winches.

Polaris Ranger XP 1000 fitment

Mount #106165 may require drilling. Match your exact model, trim and year to the following fitment information.

• Ranger XP 1000 (EPS / Premium / LE / Trail Boss): 2018–2027
• Ranger XP 1000 CAB: 2027
• Ranger XP 1000 Northstar Edition (Base / Ultimate / Premium / Trail Boss): 2018–2024
• Ranger XP 1000 Northstar Edition (Base / Ultimate / Premium / Trail Boss): 2025–2027. Requires 2-inch leveling kit #106322.
• Ranger XP 1000 Texas Edition: 2020–2021
• Ranger Crew XP 1000: 2019–2027
• Ranger Crew XP 1000 CAB: 2027
• Ranger Crew XP 1000 Northstar Edition (Base / Ultimate / Premium / Trail Boss / Texas): 2019–2027
• Ranger Crew XP 1000 Texas Edition: 2020–2027

Do not assume fitment for models or years not listed. Modified UTVs with larger tires, lift kits, forward A-arms or tracks may need a KFI leveling kit. Check mount clearance and installation requirements for your specific setup. Shop KFI leveling kits.

72-inch blade details

• 11-gauge steel blade with added gussets and 3/16-inch Grade 50 ribbing
• 16-inch vertical blade face; approximately 21 inches high with the included 7-inch-high, two-ply top rubber snow flap
• Adjustable blade skids with bolt-on brackets and 3-inch-diameter Grade 50 steel skid plates
• Two-sided 3/16 x 3-inch Grade 50 steel wear bar attached with Grade 8 bolts
• Metal bead-blasted and metallic-silver powder-coated finish

Pro 2.0 push tube

• Front-mount design with 30+ inches of listed lift height when operated with a winch
• Heavy-duty 1-1/2-inch, 12-gauge square steel tubing; 1/4-inch-thick Grade 50 pivot bushings; 6-inch POM rotator bushing
• Easy-pull pin blade-angle adjustment, multi-position lift bracket, six 5-degree blade-pitch adjustments and three blade-angle positions up to 25 degrees
• Black powder-coated push tube, listed by KFI as made in the USA

KFI lists a 2-year warranty for the blade and push tube.

Installation instructions

Use the installation instructions supplied for Ranger mount #106165. Mount installation may require drilling. Confirm the requirements for your exact Ranger XP 1000 model and year before installation.

• Pro S plow blade #105072 instructions
• Pro 2.0 push tube #106300 instructions
• Plow Mount 106165 Instructions

Common questions

Does this kit fit the Polaris Ranger XP 1000 and Crew?

Yes, this listing uses mount #106165 for the Ranger XP 1000 and Ranger Crew XP 1000 models and years listed above. Check your exact trim and year before ordering.

Do Northstar models need a leveling kit?

The listed 2025–2027 Ranger XP 1000 Northstar Edition models require the 2-inch KFI leveling kit #106322. Check the fitment list for your exact model.

Does installation require drilling?

Mount #106165 may require drilling. Review the supplied mount instructions for your vehicle.

Does this kit include a winch?

No. A separate winch is required to raise and lower the plow blade.

What if my Ranger XP 1000 has a lift or larger tires?

Larger tires, lift kits, forward A-arms or tracks may require a KFI leveling kit. Check clearance and mounting requirements before installation. Shop KFI leveling kits.

Fast, free shipping.