KFI CFMOTO UFORCE 800 Pro Poly Snowplow Kit - 66 Inch Blade

The KFI Products Pro Poly 66-inch snowplow kit is listed for 2013–2023 CFMOTO UFORCE 800 models using front mount #105600. It includes a black poly-face blade, vehicle-specific mount and Pro 2.0 push tube. A separate winch is required to raise and lower the blade and is not included.

Prepare your UFORCE 800 for snowy driveways and trails with a flexible, heavy-duty poly blade face supported by a Grade 50 steel frame. The dual-curvature face moves snow, while adjustable skids let you set up the blade for winter clearing.

What is included in this snowplow kit?

• One 66-inch KFI Pro Poly blade #105866
• One CFMOTO UFORCE 800 front plow mount #105600
• One UTV Pro 2.0 push tube #106300
• 7-inch-high, 2-ply rubber top flap and plow markers
• Installation instructions and mounting hardware

Kit SKU: 105600-105866-106300

CFMOTO UFORCE 800 fitment

Listed for 2013–2023 CFMOTO UFORCE 800 models with KFI mount #105600. Confirm your vehicle’s model, year and mount compatibility before ordering. This listing does not establish fitment for other UFORCE models or model years.

Installation may require drilling. Review the linked installation instructions before fitting the kit. A winch is required for blade lifting. Shop ATV and UTV winches.

Vehicles with larger tires, lift kits, forward A-arms or tracks may need a KFI leveling kit. Check clearance and installation requirements for your specific setup. View KFI Pro 2.0 push tube leveling kits.

66-inch Pro Poly blade specifications

• Blade width: 66 inches
• Blade face: Flexible heavy-duty black poly with dual curvature
• Blade height: 21-inch vertical face; approximately 27 inches with snow flap
• Top flap: 7-inch-high, 2-ply rubber
• Ribs and frame: 3/16-inch Grade 50 steel
• Frame finish: Bead-blasted before black powder coating
• Skids: Fully adjustable with bolt-on brackets and heavy-duty 3-inch-diameter Grade 50 steel skid plates
• Wear bar: Two-sided 3/16 x 3-inch Grade 50 steel, attached with Grade 8 bolts
• Accessories: Plow markers included
• Compatibility: Works with KFI ATV and UTV tubes
• Origin: Blade made in the USA
• Warranty: 2-year KFI blade warranty

Pro 2.0 push tube and front mount

• Front-mount design with 30+ inches of listed lift height when operated with a winch
• Heavy-duty 1-1/2-inch, 12-gauge square steel tubing
• 1/4-inch-thick Grade 50 pivot bushings and 6-inch POM rotator bushing
• Easy-pull pin blade-angle adjustment and multi-position lift bracket
• Six 5-degree blade-pitch adjustments and three blade-angle positions up to 25 degrees
• Black powder-coated push tube, listed by KFI as made in the USA
• Front lower mount compatible with the KFI Pro 2.0 square tube system #106300
• 2-year KFI push tube warranty

Installation instructions

• CFMOTO UFORCE 800 mount #105600 installation instructions
• 66-inch Pro Poly blade #105866 installation instructions
• Pro 2.0 push tube #106300 installation instructions

Frequently asked questions

Does this snowplow kit fit a CFMOTO UFORCE 800?

This KFI kit is listed for 2013–2023 CFMOTO UFORCE 800 models using front mount #105600. Confirm your model year and mount compatibility before ordering.

Which blade comes with this kit?

The kit includes the 66-inch KFI Pro Poly blade #105866 with a flexible black poly face and a steel supporting frame.

Does the snowplow kit include a winch?

No. The kit includes the blade, front mount and push tube. A separate winch is required to raise and lower the blade.

Will this kit fit other CFMOTO UFORCE models?

This listing covers the UFORCE 800 only. Verify the correct kit and mount for other UFORCE models or model years.

Can I install this plow on a lifted UFORCE 800?

Lift kits, larger tires, forward A-arms or tracks may require a KFI leveling kit. Check clearance and mounting requirements for your vehicle before installation.

Does installation require drilling?

Drilling may be required. Review the mount, blade and push tube instructions linked above before installation.

Fast, free shipping.