KFI Can-Am Defender HD5 Pro Poly Snowplow Kit - 66 Inch

The KFI 66-inch Pro Poly snowplow kit for Can-Am Defender HD5 models combines a flexible black poly blade, vehicle-specific front mount #105780 and Pro 2.0 push tube #106300. Use your Defender for winter driveway and trail snow removal with a dual-curvature blade face, adjustable skids and adjustable blade angle.

This is the Pro Poly blade kit, not the metallic-silver Pro S steel-blade kit. A separate winch is required to lift and lower the blade and is not included. Fast, free shipping.

What's included

• One 66-inch KFI Pro Poly blade #105866
• 7-inch-high, two-ply top rubber snow flap and plow markers
• Can-Am Defender front plow mount #105780
• UTV Pro 2.0 push tube #106300
• Mounting hardware and installation instructions

66-inch Pro Poly blade specifications

• Flexible heavy-duty black poly face with dual curvature
• 21-inch vertical blade face; approximately 27-inch overall height with snow flap
• 3/16-inch Grade 50 steel rib and frame construction
• Steel components bead-blasted before black powder coating
• Fully adjustable blade skids with bolt-on brackets
• Heavy-duty, 3-inch-diameter Grade 50 steel skid plates
• Reversible 3/16 x 3-inch Grade 50 steel wear bar secured with Grade 8 bolts
• Blade made in the USA; 2-year KFI blade warranty

Can-Am Defender HD5 fitment

This kit is listed for Can-Am Defender HD5 models using KFI mount #105780. Confirm your exact model, year, trim and mount compatibility before ordering. Do not assume compatibility with other Defender engine sizes or configurations.

Plow leveling-kit guidance

Confirm any leveling-kit requirement for your exact HD5 model and setup before ordering. Larger tires, lift kits, forward A-arms or tracks may require a leveling kit. Check clearance and installation requirements for your setup. View KFI Pro 2.0 plow leveling kits.

Pro 2.0 push tube and front mount

• Front-mount design with 30+ inches of listed lift height when operated with a winch; actual clearance depends on your setup
• Heavy-duty 1-1/2-inch, 12-gauge square steel tubing
• 1/4-inch-thick Grade 50 pivot bushings and 6-inch POM rotator bushing
• Easy-pull pin blade-angle adjustment and multi-position lift bracket
• Six 5-degree blade-pitch adjustments and three blade-angle positions up to 25 degrees
• Black powder-coated, USA-made push tube with a listed 2-year KFI warranty

Installation and winch requirements

A winch is required to raise and lower the plow and is sold separately. Review the mount, blade and push-tube instructions before installation. Shop ATV and UTV winches.

• Defender HD5 mount #105780 installation instructions
• Pro Poly blade #105866 installation instructions
• Pro 2.0 push tube #106300 installation instructions

Frequently asked questions

Is this a poly blade or a steel blade?

This kit includes the KFI Pro Poly blade with a flexible black poly face. Its supporting ribs, frame and wear bar are steel. It is not the metallic-silver Pro S steel-face blade.

How wide is the plow?

The blade is 66 inches wide, with a 21-inch vertical face and approximately 27-inch height including the rubber top flap.

Does this kit fit my Can-Am Defender HD5?

This listing is for Defender HD5 models using mount #105780. Confirm your exact year and trim, including any leveling-kit requirement, before ordering.

Are the rubber top flap and plow markers included?

Yes. The Pro Poly blade includes a 7-inch-high, two-ply rubber top flap and plow markers.

Is a winch included?

No. A separate winch is required to lift and lower the plow.

Will I need a leveling kit?

Leveling-kit requirements depend on your exact model and setup. Vehicles with larger tires, lift kits, forward A-arms or tracks may need one. Contact us with your vehicle details to confirm the correct setup.

What warranty is listed?

KFI lists a 2-year warranty for the blade and push tube.