KFI Can-Am Commander Pro Poly Snowplow Kit - 66 Inch Blade

The KFI Pro Poly 66-inch snowplow kit for Can-Am Commander includes a black Poly blade, vehicle-specific front mount, and UTV Pro 2.0 push tube. Choose the model-year option that matches your Commander or Commander MAX using the fitment list below. A winch is required to raise and lower the plow and is not included.

Put your Commander to work clearing a snow-covered driveway or access trail. The curved Poly face moves snow, while the adjustable blade angle lets you direct it to the side. Fast, free shipping.

What is included?

• One 66-inch KFI Pro Poly plow blade
• Vehicle-specific UTV front plow mount
• KFI UTV Pro 2.0 push tube
• 7-inch-high, 2-ply top rubber flap and plow markers
• Adjustable blade skids, installation instructions, and mounting hardware

Winch sold separately: A winch is needed to lift and lower the blade. Shop winches for ATV and UTV plows.

Poly blade construction and specifications

This is a Poly-face snowplow, not an all-steel moldboard blade. The flexible, heavy-duty black Poly face is supported by a steel rib and frame assembly. Steel references below describe the supporting components and wear bar, not the Poly plowing face.

• Blade width: 66 inches
• Blade face: Black Poly with dual curvature
• Face height: 21 inches vertically; approximately 27 inches with snow flap
• Top flap: 7-inch-high, 2-ply rubber
• Ribs and frame: 3/16-inch Grade 50 steel
• Wear bar: Reversible, two-sided 3/16-inch x 3-inch Grade 50 steel, attached with Grade 8 bolts
• Skids: Fully adjustable with bolt-on brackets and heavy-duty 3-inch-diameter Grade 50 steel skid plates
• Steel component finish: Bead-blasted preparation and black powder coating
• Blade origin: Made in the USA
• Warranty: 2-year KFI warranty for blade and push tube

Can-Am Commander and Commander MAX fitment

Select the matching model and year before ordering. Fitment is limited to the models listed here; do not assume every trim fits simply because its year falls within the overall range.

Mount #105275

• 2010-2020 Commander 800-1000
• 2015-2020 Commander MAX 800-1000

Mount #105980

• 2021-2026 Commander DPS and XT
• 2022-2026 Commander X MR with 30-inch tires: requires front leveling kit #106322
• 2021-2026 Commander XT-P with 30-inch tires
• 2021-2026 Commander MAX DPS and XT
• 2024-2026 Commander MAX X MR
• 2022-2026 Commander MAX XT-P

Vehicles with larger tires, lift kits, forward A-arms, or tracks may need a KFI leveling kit for correct plow-mount fitment. View KFI Pro 2.0 push tube leveling kits.

Pro 2.0 push tube and front mount

• Front-mount design with listed lift height of 30+ inches when operated with a winch
• Heavy-duty 1-1/2-inch, 12-gauge square steel tubing
• 1/4-inch-thick Grade 50 pivot bushings and 6-inch POM rotator bushing
• Easy-pull pin blade-angle adjustment and multi-position lift bracket
• Six 5-degree blade-pitch adjustments and three blade-angle positions up to 25 degrees
• Black powder-coated push tube, made in the USA
• Front lower mount compatible with KFI Pro 2.0 square tube system #106300

Installation instructions

• Mount #105275 instructions for listed 2010-2020 models
• Mount #105980 instructions for listed 2021-2026 models
• Pro Poly plow blade installation instructions
• Pro 2.0 push tube #106300 instructions

Frequently asked questions

Is this a Poly blade or a steel blade?

This kit includes the 66-inch KFI Pro Poly blade with a flexible black Poly plowing face. Its reinforcing ribs, frame, wear bar, and skid plates are steel components.

Does this snowplow kit include a winch?

No. A winch is required to raise and lower the plow and is sold separately.

Will this kit fit a Can-Am Commander MAX?

It fits the listed 2015-2020 Commander MAX 800-1000 models and the specific 2021-2026 MAX trims shown above. Select the matching model-year option and check the detailed fitment list.

Do I need a leveling kit?

The listed 2022-2026 Commander X MR with 30-inch tires requires front leveling kit #106322. Other vehicles with modifications such as larger tires, lifts, forward A-arms, or tracks may also need a leveling kit.

How wide is the Poly plow blade?

The blade is 66 inches wide, with a 21-inch vertical face height and approximately 27-inch overall height with the snow flap.