High Lifter Signature Lift Kit for Polaris Ranger 800 Models - 3 Inch

High LifterSKU: PLK800R-50

Sale price$189.95
In stock (10 units), ready to be shipped


High Lifter 3 Inch Signature Series Lift Kit for Polaris Ranger 800 Models. Lift Kit increases your ground clearance and makes room for larger tires to dig deep and ride hard in most any terrain. 

Click Here to View PDF Installation Instructions

2010 Polaris Ranger 800 XP Crew
2010 Polaris Ranger 800 XP
2010 Polaris Ranger 800 HD
2010 Polaris Ranger 800 XP
2011 Polaris Ranger 800 XP EPS
2011 Polaris Ranger 800 XP
2011 Polaris Ranger 800 HD
2011 Polaris Ranger 800 Crew
2012 Polaris Ranger 800 XP EPS
2012 Polaris Ranger 800 XP
2012 Polaris Ranger 800 HD
2012 Polaris Ranger 800 Crew
2013 Polaris Ranger 800

An easy-to-install, bolt-on lift that consistently measures truer over competitor products.

High Lifter's Steering Stops (RANGER-SSK) are a must-have for Ranger Lift Kit owners. The Steering Stops helps reduce the turn radius and can help prevent breaking an axle. Click HERE to add a set of Steering Stops to your order today!

NOTE: This product has replaced lift kit PLK700R-01.

NOTE: This kit fits full size models only.

NOTE: 1.5" spacers are recommended, but a MINIMUM of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires at 1.5" or wider, spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.

NOTE: New Rear High Lifter Outlaw DHT Axles or heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage.

NOTE: High Lifter's Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have upgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2" Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger.

3" Signature Series Lift Kit Features:
- Zinc plating or powder coat finishes for long life in rugged conditions
- All installation hardware included
- Detailed step by step photo instructions
- Signature Series include High Lifter logo precision laser cut
- Backed by High Lifter Lifetime Warranty

Tire Fitment:
Polaris 800 EFI Ranger XP, HD IRS - Up to 28"***
Polaris 800 Ranger Crew IRS - Up to 28"***

***NOTE: The stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

 ⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

You may also like

Recently viewed