High Lifter Polaris RZR PRO XP 5 Inch Spring Lift Kit


With The High Lifter Polaris RZR PRO XP 5 Inch Spring Lift Kit Get the lift needed for tighter suspension and larger tires on your PRO XP! Our lift consistently measures truer (and higher) than the competition. This is a spring lift kit that maximizes lift without severe axle angles. Shock adjusters are set at factory (stock) pre-load. Springs are silver.

Take your UTV to the edge with High Lifter’s 5" Spring Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit.

Note: Powder coating springs will VOID the warranty.

5" Spring Lift Kit Features
Spring material: high tensile alloy spring steel for strength and longevity
Springs designed to be longer than stock - front spring is two inches longer and the rear is three inches longer than the factory springs
Increased front wire diameter by 11% and rear by 22%.
Front gains 3" ground clearance at factory settings, rear gains 5" of additional ground clearance. Customer can adjust the springs to their preferred ride quality and height.
Spring Rate is 300lbs/inch front & rear
All hardware needed for successful installation
User-friendly instructions
Tire fitment: Up to 35"

Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Note: Powder coating springs will VOID the warranty.

     ⚠ California Proposition 65 Warning ⚠
    WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.