The SuperATV Atlas Pro Front A-Arms with 2 Inch Forward Offset for Can-Am Defender HD10 Models, they’re powerful and brawny, boosting your clearance and giving your machine that “bad-to-the bone” look. The 1.5" diameter tubing improves on the design of the standard offset A-arms and measures in at 0.5” larger than stock. Plus, you get a 2" offset for more stability and room for 32" tires.
Store Sale! A 15% discount will automatically be taken off this product at Checkout.
Defender HD 10 : 2020+
Defender HD 10 DPS : 2020+
Defender HD 10 Mossy Oak : 2020-2022
Defender HD 10 Pro : 2020+
Defender HD 10 Pro Ltd Cab : 2021+
Defender HD 10 XMR : 2018-2022
Defender HD 10 XT : 2020+
Defender HD 10 XT Cab : 2018-2022
Defender HD 10 XTP : 2020+
Defender Limited : 2020+
Defender MAX HD 10 : 2020+
Defender MAX HD 10 DPS : 2020+
Defender MAX HD 10 Lone Star Edition : 2018+
Defender MAX HD 10 XMR : 2019-2022
Defender MAX HD 10 XT : 2020+
Defender MAX HD 10 XT Cab : 2018-2022
Click Here for Instructions
Made with 1.5” x .138” wall steel DOM tubing
Fit up to 32” tires
Made with 2” diameter tubing
0.5” larger than stock
0.25” larger than our standard High-Clearance 2” Forward Offset A-Arms
Adjustable 24 mm pivot blocks for full camber adjustability
Utilizes stock A-arm bushings
UV-resistant powder coat finish
Easy to install
Backed by a lifetime warranty
NOTE: You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.
These Atlas Pro A-arms are large and beefy, the biggest A-Arms we have ever designed. The enlarged 1.5” diameter tubing will turn heads. And while you’re on the trail, it gives you the strength you need and the reliability you count on. Half an inch bigger than stock may not sound big, but the difference is huge when it comes to A-arms. Plus, we finish them with a UV-resistant powder coating to increase durability and corrosion resistance.
The design of these Can-Am Defender HD10 control arms gives you an additional 2" of ground clearance, allowing you to ride over stumps and rocks you’d pass up in the past. And they come with a 2” forward offset, adding length to your wheelbase. The offset allows you to run up to 32” tires without adding a lift kit. The trail is at your mercy with larger tires, more ground clearance, and a 2” offset.
Our high-clearance A-arms also come with adjustable pivot blocks, giving you the ability to change your camber. It’s important when adding a lift kit or larger tires that you pay attention to your camber to eliminate premature wear and tear on your tires. To keep the stress off you, we’ve also pre-adjusted your pivot blocks to match your machine's stock specifications, so you don’t have to mess with them if you don’t want to.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.